wiki:DeveloperGuidelines/Optimisation

Version 19 (modified by Fran Boon, 12 years ago) ( diff )

--

Optimisation

Writing code which runs fast.

Consider having configurations which are read from DB frequently but written-to rarely, be set in configuration files which are written-out from the DB (like the CSS from themes)

  1. Optimize the models, throw away what we don't need. Every field counts.
    Especially problematic in view of performance are references (joins), as they execute implicit DB requests. The more complex references are, the slower the model loads.
  1. Function definitions in models do _NOT_ harm - the functions are not executed when the model is loaded, but just compiled - pre-compilation of the whole application gives a speed-up of just 10ms (compare to the total execution times!).
    In contrast to that, module-level commands (which are executed at time of loading of the model, e.g. CRUD string definitions) slow it down. Suggestion: put them into a "config" function for that model, and call only as needed.
  1. Everything that is static should be in the "static" folder - that applies especially to static JavaScript. If you put such in views, it gets processed by the view compiler and passed as dynamic content, which is totally unnecessary. Loading from static also gives the advantage that it gets cached by the webserver _and_ the client.
  1. Avoid _implicit_ redirects! (that is, without user interaction, e.g. as in open_module. There may be redirects that cannot be

avoided.).
A redirect simply doubles the response time (executes a new request and thus loads it all again).

  1. Be careful with Ajax - this might work nicely in local environments, but in real-world deployments this has shown to be unreliable and slow.
  1. Python runs very fast as opposed to DB queries, so it can be much faster to retrieve 100 rows in one query and then drop 95 of them in the Python code, than to retrieve 5 rows in 5 queries (=do not loop over queries, better loop over the results).

NB Performance is not everything, and you should not optimize any code without actually having a problem with it. In most cases, response times of around 600ms are totally acceptable (or a minor compared with the average download times on-site).

There are more things to consider besides performance, e.g. usability and maintainability of code. New contributors should be able to easily understand the code, and bugs should be easy to find.

Specific Examples

NB These vary on cases, so use the Profiler to see how they work in your cases...

for i in range(0, len(rows)):
     row = rows[i]

runs much faster than:

 for row in rows:

(0.05 vs. 0.001 seconds in one test case, 2x improvement in another & a slight negative improvement in a 3rd).


value = db(table.id==id).select(table.field, limitby=(0, 1))[0]

runs 1.5x faster than:

value = table[id].field

(0.012 vs. 0.007 seconds vs in a test case)

Profiling


DeveloperGuidelines

Note: See TracWiki for help on using the wiki.