Synchronization

Purpose

Method

Overview

The synchronization process is controlled entirely by the local Sahana Eden instance.

The local Eden instance runs the scheduler process, and initiates the update requests when due, while the remote repository merely responds to these requests.

The local Eden instance first downloads the available updates from the remote repository (pull) and imports them into the local database, and then uploads all available updates from the local database to the remote repository (push).

Both pull and push are each a RESTful HTTP-request, using S3XML as data format.

Configuration

Prerequisites

Both sites must have Sahana Eden installed and running. To avoid problems with different database structures, both Sahana Eden instances should always use the same version of the software.

Decide which one is the local and which the remote site. The remote site is typically a permanently and publicly accessible Sahana Eden instance, while the local site could be a protected site, or with only temporary network access. See Synchronization Overview to understand the situation.

While performing synchronization jobs, the local site must be able to establish a connection to the remote site over the network using HTTP.

If a proxy server is to be used for the HTTP connection, this can be configured in the Synchronization Settings (proxy authentication is currently not supported).

Check that both instances have the synchronization module enabled in models/000_config.py. If the sync section is missing from deployment_settings.modules, then add it as follows:

deployment_settings.modules = OrderedDict([

    ...

    # Add or uncomment this section, if it is missing or commented:
    ("sync", Storage(
            name_nice = T("Synchronization"),
            description = T("Synchronization"),
            restricted = True,
            access = "|1|",     # Only Administrators can see this module in the default menu & access the controller
            module_type = 0     # This item is handled separately for the menu
        )),

    ...

])

Synchronization Homepage

Login as administrator and open the Administration menu. In the left menu, you find the following entries:

Click on Synchronization here to open the homepage of the Synchronization Module:

Synchronization Settings

Go to the Synchronization Homepage and click Settings to open this page:

UUID

This page shows you the UUID (universally unique identifier) of this repository. You will need this identifier to register the repository at the peer site (the local UUID to register at the remote site, and the remote UUID to register at the local site). The UUID is created during the first run of the Sahana Eden instance, and cannot be changed.

To Do

...at the local site:

• if needed, enter the complete URL of the proxy server (including port number if not 80) that is to be used when connecting to the remote site. Click Save to update the configuration.

...at the remote site:

• no change required

Worker

The scheduled synchronization jobs are performed by a separate asynchronous web2py worker process at the local site.

To Do

...at the local site:

To start the worker process, open a shell on the local server, change into the web2py home directory and run:

python web2py.py -K eden -Q

(replace "eden" with the name of your Sahana Eden application if necessary)

In more advanced configurations you may want to run this command as a daemon process, e.g. under Linux by:

nohup python web2py.py -K eden -Q >/dev/null 2>&1 &

...at the remote site:

• no action required

Repository Configuration

Go to the Synchronization Homepage and click Repositories. This will show you a list of all configured repositories:

The Open button in each line opens the configuration for the respective repository.

By clicking Add Repository, you can add a new peer repository configuration:

Field	Instructions	at the local site	at the remote site
Name	Enter a name for the repository(for your own reference)	required	required
URL	Enter the URL of the repository	required	-
username	Enter the username to authenticate at the repository	required	-
password	Enter the password to authenticate at the repository	required	-
proxy	Enter the URL of a proxy server to connect to the repository, if different from the Synchronization Settings	fill in as needed	-
Accept Pushes	check this if the repository is allowed to push updates	-	set as needed
UUID	Enter the UUID from the Synchronization Settings of the repository	required	required

To Do

...at the local site:

• add a repository configuration for the remote site

...at the remote site:

• add a repository configuration for the local site

Resource Configuration

• tbw

Synchronization Schedule

• tbw

Synchronization Log

Go to the Synchronization Homepage and click Log. This shows you a list of all prior log entries for all repositories.

If you instead want to see the log entries only for a particular repository, go to the Synchronization Homepage, click Repositories, then Open the respective repository configuration and go to the Log tab:

Note: the newest entries are shown on top of the list.

Click on Details for a log entry to see the complete entry:

Item	Explanation
Date/Time	Date and time of the transaction
Repository	Name of the repository synchronized with
Resource Name	Name of the resource synchronized
Mode	Transaction mode (pull or push) and direction of transmission (incoming or outgoing)
Action	Action performed to resolve problems (if any)
Result	Result of the transaction
Remote Error	True if there was an error at the remote site
Message	The log message

---

See S3/Synchronization