|Version 12 (modified by 8 years ago) ( diff ),|
Table of Contents
- Copy the files you need off the flash drive
- Install VirtualBox
- Import the image into the virtual machine
- Connect to the network
- Start the virtual machine
- You may want to change the dev password.
- Fix these before starting Eden
- Update Eden if needed
- Next steps
Installation Guidelines: Virtual Machine
These instructions go along with the custom virtual machine image supplied for the GHC Codeathon. Its copy of the Eden repository points to the GHC team repository on GitHub.
The most convenient way to get up and running is to use a pre-configured development kit -- a complete operating system that's been set up to include all the required code and tools, and saved as an image of the system's disk -- and run this "virtual system" (sometimes called an "appliance") in a "virtual machine" (VM). The virtual machine runs as an application on your machine -- the "host" machine -- and emulates a separate computer -- the "guest" machine. You won't have to install anything but the virtual machine directly on your system. (We're including the official virtual machine jargon in case you need to read virtual machine documentation. We'll use "VM" to refer to the guest virtual machine. The virtual machine "manager" will be the tool that is used to configure and start your VM.)
Copy the files you need off the flash drive
- Everyone should copy:
- The readme file
- The virtual machine image
- The docs directory
- The readme file
- Mac users copy the
- Windows users copy the
Now give the flash drive to the next person waiting for it.
If you're installing on Mac or Windows
- Mac and Windows users have VirtualBox installers from the flash drive, in directories
- Run the installer (by whatever means is appropriate for your system).
- Let it install all features.
- The installation will temporarily disconnect your machine from the network -- take appropriate action before letting the installer proceed if you are running something that can't tolerate being disconnected.
- (Windows users: You don't need those "extensions" unless you want to use the USB drive from your virtual machine. You can always install them later.)
If you're installing on Linux
- Linux users should download the appropriate VirtualBox installation file for your system, and follow instructions there.
Import the image into the virtual machine
- Start VirtualBox Manager (or let the installer start it).
- Give VirtualBox Manager the image to run:
- Select File -> Import Appliance.
- Click the Choose button. Navigate to and select EdenDevEnvGHC.ova.
- Click Next (or Open, for a Mac).
- (Do not uncheck any options on the appliance options form.)
- Click Import.
Connect to the network
Next tell the VM about your machine's network interface, so the guest can get to the network.
- Scroll down on the right side of VirtualBox Manager until you see Network -- click that.
- If no adapters are enabled, enable adapter 1.
- For "Attached to" select "Bridged Adapter".
- Under that, for "Name", select the appropriate network interface, e.g. wireless if that's what you're using. (Keep this setting in mind -- you may need to change it if you sometimes use a wired network, and sometimes wireless.)
Start the virtual machine
On the left side of the VirtualBox Manager GUI, you should see your new "Eden Dev Env" virtual machine.
- Double-click the virtual machine entry to start it.
- As it starts up, it may show popups about "mouse / keyboard capture". Check "Don't show this again" and dismiss the popups.
- The Login screen should appear. User is dev and password is eden.
- After you're logged in, the Eclipse IDE will start -- ignore it for the moment.
You may want to change the dev password.
- Start a terminal window by double-clicking the !LXTerminal icon.
- To change your password, type
passwdand follow the instructions.
Fix these before starting Eden
- Install the dateutil library:
sudo apt-get install python-dateutil
- Get a fresh copy of the configuration file:
- In Eclipse, find
web2py/applications/eden/models/000_config.pyand delete it (right-click (or Mac equivalent), delete).
- Also in Eclipse, find
web2py/applications/eden/deployment-templates/models/000_config.pyand copy it to
web2py/applications/eden/models/000_config.pyand change the first "False" to "True" -- that's this line:
FINISHED_EDITING_CONFIG_FILE = True
- In Eclipse, find
Update Eden if needed
If you arrived at the beginning of the Codeathon, you don't need to do this. If you started later, and people might have started updating the team Eden branch on Launchpad, then make sure you have all of their work by doing:
- (If you don't have one open) start a terminal window by double-clicking the !LXTerminal icon.
cd /home/web2py/applications/eden git pull upstream
Installation is complete here.
Go hack! Success!